Refurbished PDTHR 300

PRL Truck Mounted Drill Rig Model PDTHR-300 Refurbished is primarily designed for water well applications as drinking water or for agricultural use. PRL PDTHR- 300 Refurbished is among the best and most sought after truck mounted drilling rig in the market. It is intended for use in borehole drilling for consumable and agricultural purposes. PRL PDTHR 300 Refurbished is designed for 152 – 254mm (6” to 10”) diameter holes with a down the hole hammer and 152-304mm (6”-12”) with Rotary operation.

Prime Mover: Truck  
Make Ashok Leyland
Drive 6 x 4
Gross Vehicle Weight 25 MT
Engine Rating 169 HP @ 2400 rpm
Air Compressor  
Make ELGI
CFM 1100
PSI 300 (21 Bar)
Drill Depth  
Maximum Depth 300 Meters (1000 Feet)
Rod Handling 4.5 Meter (15 Feet)
Hole Diameter  
DTH 152-254mm (6 “- 10”)
Rotary 152 – 304mm (6”-12”)
Mast  
Max Capacity 18 tons (39600 lbs)
Height 8.5 mtr
Rod handling capacity 4.5 mtr (15 ft)
Main Hoist Assembly  
Line Pull ( Bare Drum) 3000 Kgf
Max Line Speed 40 M/Minute
Wire Dia 16 mm
Drive Hydraulic
Feed System  
Pull Up 11,500 Kgf
Pull Down 6,000 Kgf
Hoisting Speed 35 Mtr/Minute
Auxillary Winch  
Bare Drum Pull 1000 Kgf
Max Speed 20 M/Minute
Hydraulic Circuit  
Max Operating Pressure 220 kg/cm2
Hydraulic Tank Capacity 600 Litres
Filtration Non – Returnline 10/25 Microns
Rotary Head  
Torque 600 Kg-M( Optional: 750 kg-M)
Rotation Speed 1 -100 Rpm (Optional 0-85 rpm)
Centrifugal Pump Centrifugal Heavy duty CP pump C-1
Cylinders  
Stabilizing Cylinders 4 Nos 125 mm(Bore), 610 mm(Stroke)
Mast Raising Cylinder 125 mm(Bore), 800 mm(Stroke)
Feed Cylinder 125 mm(Bore), 2350 mm(Stroke)
Breakout Wrench 80 mm(Bore), 300 mm(Stroke)
RH Slide Out Cylinder 80 mm(Bore), 450 mm(Stroke)

Reviews

There are no reviews yet.

Be the first to review “Refurbished PDTHR 300”

Your email address will not be published. Required fields are marked *