Visit our YouTube Channel for Live Product, Testing & Loading: https://bit.ly/3uYeweg
| Prime Mover: Truck | |
|---|---|
| Make | Man Truck |
| Drive | 4 x 4 |
| Tyre Size | 12.20 |
| Air Compressor | |
| Make | ELGI |
| Model | 1000 / 275 |
| CFM | 1000 |
| PSI | 275 |
| Drill Depth | |
| Maximum Depth | 200 Meters(656 Feet) |
| Rod Handling | 3 inch (15Feet) |
| Hole Diameter | |
| DTH | 114mm – 152mm(4.5"- 6") |
| Rotary | 152 – 203mm(6”-8”) |
| Mud Pump | |
| Make | G&P/ Lakshmi |
| Model | 5”X 4.5 ” |
| Stroke | 125mm |
| Liner Size | 115mm |
| Mast | |
| Max Capacity | 18 tons (39600 lbs) |
| Height | 6 mtr (19 ft) |
| Main Hoist Assembly | |
| Line Pull ( Bare Drum) | 3000 Kgf |
| Max Line Speed | 40 M/Minute |
| Wire Dia | 16 mm |
| Drive | Hydraulic |
| Feed System | |
| Pull Up | 11,500 Kgf |
| Pull Down | 6,000 Kgf |
| Hoisting Speed | 35 Mtr/Minute |
| Auxillary Winch | |
| Bare Drum Pull | 1000 Kgf |
| Max Speed | 20 M/Minute |
| Hydraulic Circuit | |
| Max Operating Pressure | 220 kg/cm2 |
| Hydraulic Tank Capacity | 600 Litres |
| Filtration Non –Returnline | 10/25 Microns |
| Rotary Head | |
| Torque | 600 Kg-M |
| Rotation Speed | 1 -100 Rpm |
| Cylinders | |
| Stabilizing Cylinders 4 Nos | 125 mm(Bore), 610 mm(Stroke) |
| Mast Raising Cylinder | 100 mm(Bore), 800 mm(Stroke) |
| Feed Cylinder | 140 mm(Bore), 2350 mm(Stroke) |
| Break out Wrench | 80 mm(Bore), 300 mm(Stroke) |
Frequently Asked Questions
What is the maximum drilling depth of the PDTHR 200 Man Truck?
The PDTHR 200 Man Truck is designed to achieve a maximum drilling depth of up to 200 metres, depending on geological conditions and project-specific operating requirements.
What drilling methods does the PDTHR 200 support?
The rig supports both DTH and rotary drilling methods, providing flexibility for water well and borehole projects across different ground and formation conditions.
What hole diameters can the PDTHR 200 drill?
The PDTHR 200 supports DTH hole diameters from 152–203 mm and rotary drilling diameters from 152–254 mm, depending on the selected drilling method.
What type of truck is used for the PDTHR 200?
The PDTHR 200 is mounted on a MAN truck with a 6×4 drive configuration, supporting mobility and accessibility across different drilling locations and project sites.
What applications is the PDTHR 200 Man Truck suitable for?
The rig is primarily designed for water well and borehole drilling applications, including projects focused on drinking water supply and agricultural water requirements.
Reviews
There are no reviews yet.