| Specifications | |
|---|---|
| Carrier Truck | |
| Make | Ashok Leyland BS4 |
| Model | 6×4 (10 Tyres) |
| Support Truck | |
| Make | Ashok Leyland BS4 |
| Model | 6×4 (10 Tyres) |
| The Truck is for Mounting Compressor & Mud Pump. | |
| Air Compressor | |
| Make | ELGI |
| Maximum Air Flow | 1500 CFM |
| Maximum Rated Pressure | 400 PSI Fuel Tank for the compressor |
| CARRIER TRUCK | |
| Make | ASHOK LEYLAND MAKE WITH BOOGIE SUSPENSION |
| Model | 10 TYRE(6X4) |
| Technical Specification | |
| Air Compressor | |
| Make | ELGI |
| Model | 1500/400 |
| CFM | 1500 |
| PSI | 400 |
| Hydraulic Circuit | |
| Max Operating Pressure | 220 kg/cm2 |
| Hydraulic Tank Capacity | 750 Litres |
| Filtration Non – Returnline | 10/25 Microns |
| Prime Mover | Truck |
| Make | Ashok Leyland |
| Model | 2523 |
| Drive | 6 x 4 |
| Gross Vehicle Weight | 25 MT |
| Engine Rating | 230 HP @ 2200 rpm |
| Prime Mover | Truck |
| Make | Ashok Leyland |
| Model | 2523 |
| Drive | 6 x 4 |
| Gross Vehicle Weight | 25 MT |
| Engine Rating | 230 HP @ 2200 rpm |
| Prime Mover | Truck |
| Make | Ashok Leyland |
| Model | 2523 |
| Drive | 6 x 4 |
| Gross Vehicle Weight | 25 MT |
| Engine Rating | 230 HP @ 2200 rpm |
| Rotary Head | Top Head Drive |
| Torque | 600 Kg-M (Optional: 750kgf |
| Rotation Speed | 1 -100 Rpm (Optional: 0-85 rpm) |
| Mud pump | |
| Mud Pump – Reputed Make | 10/7”1/2 |
| Detroit 4-71 Diesel Engine – Rated 155 HP | |
| Airline Lubricator | |
| Capacity | 1500 cfm/400 psi |
| Tank | 13 Ltr |
| Main Hoist Assembly | |
| Line Pull ( Bare Drum) | 3000 Kgf |
| Max Line Speed | 40 M/Minute |
| Wire Dia | 16 mm |
| Drive | Hydraulic |
| Auxillary Winch | |
| Line Pull ( Bare Drum) | 3000 Kgf |
| Max Line Speed | 40 M/Minute |
| Feed System | |
| Pull Up | 40 ton |
| Pull Down | 20kgf |
| Hoisting Speed | 44 Mtr/Minute |
| Mast | |
| Max Capacity | 31 tons |
| Height | 7.5 mtr |
| Mud Pump | |
| A mud pump or drilling pump is used to circulate drilling mud (also referred to as drilling fluid) downhole during drilling operations. | |
| Technical Specifications: | |
| Make | Reputed Make |
| Model | 10” x 7 ½” |
| DRILLING RODS | |
| Make | PRIME RIGS LIMITED |
| Model | 4.5” X 15ft |
| Rod Size | 4.5 |
| DTH Hammers | |
| Technical Specifications: | |
| Make: | PRIME RIGS LIMITED |
| Rod Size | 6.5”, 8” |
| DTH Button Bit | |
| Technical Specifications: | |
| Make: | PRIME RIGS LIMITED |
| Size | 6.5” |
| Available Ranges | 3”-18” |
| Drag Bit | |
| Technical Specifications: | |
| Make: | PRIME RIGS LIMITED |
| Size | 12 ¼”, 14 ¼”, 17 ¼” |
| Over Burden Bit | |
| Make: | PRIME RIGS LIMITED |
| Size | 8.5″ to 12 |
| Drilling Method | Hole Diameter | |
| Mm | Inches | |
| DTH | 304 – 355 | 12 “ – 14″ |
| Rotary | 304-406 | 12”- 16” |
| Cylinders | Bore | Stroke |
| Stabilizing Cylinders 4 Nos | 125 mm | 610 mm |
| Mast Raising Cylinder | 100mm | 650 mm |
| Feed Cylinder | 160 mm | 2350 mm |
| Breakout Wrench | 80 mm | 300 mm |
Frequently Asked Questions
What drilling methods does the PDTHR-800 support?
The PDTHR-800 supports both DTH drilling for hard rock formations and rotary drilling for unconsolidated or alluvial formations, using air, water, or foam flush methods.
What hole diameters can the PDTHR-800 drill?
The PDTHR-800 drills 304–355 mm (12–14 inches) diameter holes using the DTH method and 304–406 mm (12–16 inches) diameter holes using the rotary method.
What powers the PDTHR-800’s drilling operations?
The rig is equipped with an ELGI air compressor delivering 1,500 CFM at 400 PSI, providing strong and consistent air power for both DTH and rotary drilling.
What is the mast capacity of the PDTHR-800?
The PDTHR-800’s mast stands 7.5 metres tall with a maximum capacity of 31 tons, supporting stable and efficient drilling across demanding project conditions.
What truck is the PDTHR-800 mounted on?
The PDTHR-800 is mounted on an Ashok Leyland BS4 6×4 carrier truck, with a matching support truck used for mounting the compressor and mud pump.
Reviews
There are no reviews yet.